What Size Allen Wrench For Dodge Durango Brakes?

What Size Allen Wrench For Dodge Durango Brakes? Before you start working on your car’s brakes, you should know what size Allen wrench you’re going to need. There are three main types: 3/8” drive, Imperial, and Metric. The size you’ll need will depend on your vehicle’s make and model, but in general, you’ll need to have the proper tool for the job. In addition to that, you’ll need to know how to use the wrench properly.

3/8” drive

A 3/8” drive Allen wrench is a common tool that’s used by car mechanics to replace brake components. Its cold formed Alloy Steel socket base and S2 tool steel bit provide superior strength and durability. It also features a full range of Torx and Hex bit sockets that help remove disc brake pads and install brake pads on disc brake calipers in most vehicles.

To remove the brake caliper from the rotor, you must first loosen the lug nuts using a jackstand or Johnson bar. When the lug nuts are removed, remove the wheel to reveal the caliper. Then, pry the brake pads from the rotor.


There are many types of Allen Wrenches on the market today. Most of them come in either imperial or metric sizes, and are designed for particular kinds of fasteners. For instance, you can use a 9mm wrench to install brake calipers, while a metric one is used for other applications. It’s best to get the correct size for the job, by consulting the owner’s manual of your vehicle.

The Dodge Durango comes with four engine choices, including a new 3.6 L V6 engine. This engine is capable of 290 horsepower and 260 lb-ft of torque. Peak torque is available between 1,600 and 6,400 rpm. It is backed by a Chrysler or Mercedes W5A580 five-speed automatic transmission. A Dodge Durango’s performance is enhanced by available accessories, including heated front seats, a power liftgate, and a 150-watt inverter.


If you’re planning to replace the brakes on your Dodge Durango, a Metric Allen wrench is essential. These wrenches can be purchased at O’Reilly Auto Parts. They are available in a wide variety of shapes and sizes. They can be purchased separately or as a set.

The right Allen Wrench will depend on the size of the bolt. The standard size is 9 millimeters, which is about 3/8 inches. However, you should know that different brake calipers may require a different size of Allen Wrench. Therefore, it is always a good idea to check the owner’s manual before purchasing the correct size. Alternatively, you can also seek the assistance of a competent auto mechanic to determine the right size for you.

A socket wrench set is another essential tool. You can purchase a set that has metric and SAE sockets. These wrenches are ideal for home and auto repair projects. It is also important to have a C-clamp, which can be used to compress or spread the caliper piston. Lastly, you will need a special tool for putting the proper torque on the brake caliper bolts.

2nd Gen Dakota Technic

If you are having trouble removing the brake pads on your Dodge Durango, you’ll want to use a Dakota Technic allen wrench. These wrenches come with special torque settings for tightening and loosening your brakes. Using this type of wrench will help you get the brakes working like new in no time.

First, remove the lug bolt from the front wheel. Make sure it clears the wheel knuckle (3K185). Next, unscrew the wheel hub bolt. This will allow you to install the front disc brake rotor or caliper. Then, tighten the lug nut to 115-142Nm or 85-104 lb-ft.

Dodge Durango
Dodge Durango

2001 Dodge Durango

Unless you’re a mechanic or a car enthusiast, you likely have no idea what size Allen wrench to use for your 2001 Dodge Durango brakes. While the car is still the same, there have been some changes in the interior. For example, 2001 Dodge Durangos now come with body-color wheel flares. The exterior also received a facelift. The hood and fenders were redesigned, and new features like electronic stability control and tire pressure monitoring systems were introduced.

The 2000 Dodge Durango featured a new 4.7-liter Magnum V8 engine. This engine replaced the old 5.2-liter engine. There was no longer a 3.9-liter V6 engine in this vehicle, and it was only available in SLT Plus and R/T trim levels. Fortunately, the car still has some of the same performance features as the 5.7-liter V8 engine in the R/T.


Leave a Comment

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.